Here is how to unbrick your Infinix Zero X506, first we gonna be talking about different types of brick.
1) Soft Brick:
In this case, your phone stuck at boot animation or reboot from the boot animation.
Here your phone stuck on boot img or factory image i.e Infinix without showing the loading dot sign below your screen.
3)Dead Brick/Black Screen:
Honestly I won’t pray you experience this because in this case your phone won’t turn on / Power On or Charge nor show the red led charging sign….this is the worst state a phone could be #TBH
1) First we would need to get our PC set before we could execute this. Important stuff we need is to install drivers for the particular phone HERE is the link for the Drivers and how to install.
After Successful installation proceed to next step.
2) Download my scatter file I made with my Mtk Droid Tool here, create new folder on your desktop name it “Infinix Flash” without quote. (Contains 10 files) and extract this file there.
3) Download Sp Flash Tool here Create a new Folder on your desktop name it “Sp Flashtool” without quote, Extract the zip file of Sp Flashtool navigate to the folder you created earlier “Sp Flashtool” on your desktop and extract it there. Run Sp Flashtool as Administrator, it will pop “no scatter file selected” click ok. Click on the Second bar where you see Scatter-Loading browse where you extracted FlashToolbackupinfinixzero16+2.zip open the folder named ” Infinix Flash” and select the scatter file.
Turn Off your phone and wait for like 30secs and Hit the Download then plug your Infinix back to the Pc. When you see the red link you’re good but if no happens check your drivers. After the Yellow Link shows, and OK sign, unplug your device.
NOTE: You will be able to power your phone and go to cwm recovery for restoration of CWM backup or Installation of new Rom….
If you have a Clockworkmod backup you can restore it and if you don’t have, you could use my Xperia Rom HERE